+971 4 262 3337
Switch to Dark Mode

Octofiber ABS Filament for 3D Printer 1.75mm - 0.75kg, Blue

SKU: 18456
Report incorrect or inappropriate product information.
  Out of Stock
Notify Me When in Stock

Report incorrect or inappropriate product information.



Description for Octofiber ABS Filament for 3D Printer 1.75mm - 0.75kg, Blue

General

Octofiber ABS is produced from an optimized ABS polymer and carefully monitored pigments and is processed under the highest quality controls. This ensures a consistent product, with accurate printed objects as a result. ABS is well known for its high impact resistance and is suitable for many applications where you can use thoughness, temperature resistance up to 75 °C and a matte surface finish.


Printer compatibility

This 1.75mm product is compatible with most 1.75mm 3D printers equipped with a heated bed. We have tested Octofiber on a variety of machines; Repraps and Ultimakers of course. All with different (dual) hotends, and nozzle diameters. We are pretty sure that it will work with your machine if it looks like one listed below:

- Felix
- Makerbot
- Witbox


Printing guidelines

The values below are a safe starting point to obtain good results, but may not be optimal for your printer. for example a delta printer can achieve much higher speeds than a direct drive would. Anyways, contact us if you cannot get it working.

Printing Speed30-60mm/s
Bed temperature95 °C
Nozzle temperature225 °C


Use them as a starting point, optimal values for your specific printer may vary from the values shown above, depending on e.g. nozzle diameter, exact printing speed and layer height to name a few.


Bed adhesion

Many strategies are possible to get Octofiber ABS properly to your print-bed: clean glass, blue painters tape, glue stick, hairspray, special 3D printing stickers. Whichever option you choose, a heated bed is advised, as it increases bonding and reduces the warping process.


 General

information trade name:    Octofiber ABS Filament

polymer name:    Acrylonitrile Butadiene Styrene

 Filament specifications

Trade diameter:    1.75mm 3mm

physical diameter:    1.75 mm 2.85 mm

tolerance:    0.05 mm 0.10 mm

 Material specifications

Property:    Value, Unit, Test Method

Physical

density:    1.03 g/cm³ ISO 1183/B

melt mass flow rate (MFR):    5.6 g/10min ISO 1133

 Mechanical

strength, flexural:    52 MPa ISO 178

tensile modulus:    2050 MPa ISO 527-2

tensile stress @ yield:    38 Mpa ISO 527-2

strain @ break:    8 % ISO 527-2

tensile izod impact strength

-30 ºC 14 kJ/m² ISO 180-A

23 ºC 36 kJ/m² ISO 180-A

 Thermal

heat deflection temperature under load

50 N, 50 ºC/h 90 ºC ISO 306

10 N, 50 ºC/h 103 ºC ISO 306

linear thermal expansion:    0.000090 Cm/cm/ºC ISO 11359

Read More

Specifications for Octofiber ABS Filament for 3D Printer 1.75mm - 0.75kg, Blue

General
Brand
Microless SKU
  • 18456
Date first available
  • 11 September, 2017
Shipping Weight
  • 0.75 Kg
Color
  • Blue
Diameter
  • 1.75 mm
Material
  • ABS

Similar Products



Reviews for Octofiber ABS Filament for 3D Printer 1.75mm - 0.75kg, Blue

0
No reviews yet
Be the first to review this product

Thank you for rating!
Write a full review.
Select images