+971 4 262 3337
قم بالتبديل إلى Dark Mode

Raijintek OPHION M EVO حافظة MICRO-ATX من الزجاج المقوى ، ألواح جانبية من الزجاج المقوى على الوجهين ، مساحة لمشعات 360 مم ، متوافقة مع وحدات PSU ATX-و SFX-L ، بطاقات VGA ذات الفتحتين | 0R20B00135

الموديل: 0R20B00135
كود التخزين: 26272
الإبلاغ عن معلومات غير صحيحة أو غير ملائمة عن المنتج.

الإبلاغ عن معلومات غير صحيحة أو غير ملائمة عن المنتج.



معلومات Raijintek OPHION M EVO حافظة MICRO-ATX من الزجاج المقوى ، ألواح جانبية من الزجاج المقوى على الوجهين ، مساحة لمشعات 360 مم ، متوافقة مع وحدات PSU ATX-و SFX-L ، بطاقات VGA ذات الفتحتين | 0R20B00135

PRODUCT INFORMATION:

OPHION M EVO TGS ALUMINIUM MICRO-ATX CASE - BLACK

Raijintek has created the Ophion M EVO TGS as the bigger brother of the Ophion EVO. The Ophion M EVO TGS version offers impressive, stylish and high-quality materials along with two side panels in tempered glass. The exterior is entirely aluminium. The case offers space for Mini-ITX- and mATX motherboards. Behind its stylish exterior, users will enjoy the opportunity to install some seriously high-end hardware. This case even allows the installation of a 360 mm radiator in the roof.

THE RAIJINTEK OPHION M EVO TGS MICRO-ATX CASE AT A GLANCE

  • Black aluminium case from Raijintek
  • Two 3 mm side panels in tempered glass
  • Compatible with Mini-ITX- and Micro-ATX motherboards
  • Exterior is high quality aluminium with polished surfaces
  • Space for a 360 mm radiator and powerful ATX power supplies
  • Supports dual-slot gaming graphics cards up to 41 cm in length
  • Includes riser module with full PCI Express 3.0 x16 speeds
  • Space for three 3,5"- or five 2,5" storage devices

THE RAIJINTEK OPHION M EVO TGS MICRO-ATX CASE IN DETAIL

The ingenious design of the Ophion M EVO TGS from Raijintek enables owners to install an uncompromisingly powerful gaming PC despite its small dimensions: The graphics card is installed in parallel to the rear of the motherboard tray in a separate chamber. Furthermore, every square inch of the Raijintek Ophion M EVO TGS is used in the most space-efficient manner, minimising wasted space that is usually present in many tower-style cases. 

The exterior of the case is sleek and offers flawless craftsmanship. The anodised black aluminium is 2 mm thick and the stylish hairline finish ensures a unique and distinctive look. To this Raijintek have also added two 3 mm thick tempered glass side panels. These lend the Raijintek Ophion M EVO TGS not only a remarkably attractive exterior, they also make it easier to admire your hard-earned gaming hardware that you have installed. 

The clean and sleek front of the Ophion M EVO TGS includes, in addition to the power button with the Raijintek logo, two USB ports with motherboard connectors. Apart from the USB 3.0 Type A port, Raijintek has also included a modern USB 3.0 Type C connection. 

The clever yet minimalist design of the case also ensures that airflow moves from the bottom to the top with minimal obstruction. The bottom of the case allows for an optional 120-, 140-, or even 200 mm fan to intake fresh air. This air is pushed out by up to three 120 mm fans. The airflow therefore cools the main chamber with the motherboard and CPU as well as the chamber to the rear where the graphics card is installed. The back and roof are equipped with large air vents, while the side panels are attached to the case with spacers and screws, thus contributing to the overall airflow once again. The Ophion M EVO TGS even has enough space for two 200mm fans or a 360 mm radiator in the roof.

THE RISER MODULE: PERFECT FOR HIGH-END GRAPHICS CARDS

The right side of the case's interior allows for a motherboard in either Mini-ITX- or mATX formats to be installed. The CPU can be cooled with a cooler up to 82 mm tall. Flat top-blower coolers are adequate thanks to the falling TDPs of modern processors. Alternatively, an AiO can be used instead. A riser cable allows the PCI-Express x16 slot of the motherboard to be guided into the case's second chamber. This is where graphics cards up to 410 mm in length can be installed. 

The power supply of this diminutive gaming system can be PS/2 ATX standard and sits next to the motherboard. An extension for the mains cable leads to the corresponding plug on the back of the housing. Of course, the more compact SFX or SFX-L power supplies can also be used instead. 

Two 2.5" storage devices fit directly behind the front cover. A total of up to five 2.5" drives or three 3.5" drivescan be installed. In order to keep the inside of the stylish case dust-free, magnetic and thus removable filters are attached to the lid and the bottom.

















  • Support Micro-ATX / Mini ITX
  • 2mm aluminum & 0.8mm SPCC solid iron
  • Matte full black coating
  • 3.0mm tempered glass side panel
  • Water radiator support up to 120/240/280/360, 28mm thick water radiator
  • Super air flow, support up to 3×200mm fans in total (2×20030 fans at top, 1×20030 fan in bottom)
  • Support up to 410mm full-length graphic cad
  • Maximum CPU cooler height up to 82mm
  • Capable of install motor/water tank to achieve real /DIY water loop system
  • Magnetic dust filter for both top & bottom



TECHNICAL DETAILS:

  • Dimensions: 231 x 365 x 453 mm (W x H x D)
  • Material: Aluminium (anodised, brushed), steel, tempered glass
  • Material thickness: 2 mm (aluminium), 0,8 mm (steel), 3 mm (tempered glass)
  • Weight: 5,89 kg
  • Volume: 20,1 l
  • Colour: Black
  • Form factor: Mini-ITX, mATX
  • Total possible fans:
    3x 120 / 2x 140 / 2x 200 mm (roof)
    1x 120 / 140 / 1x 200 mm (bottom)
  • Total possible radiators:
    1x 120 / 140 / 240 / 280 / 360 mm (roof, max. 28 mm thick)
  • Dust filters:
    Roof (removable)
    Bottom (removable)
  • Drive bays: max. 5x 2,5" / 3x 3,5"
  • PSU: ATX, SFX (optional)
  • Expansion slots: 2x PCIe (Dual-Slot)
  • I/O-Panel:
    1x USB 3.0 Type C (internal connection)
    1x USB 3.0 Type A (internal connection)
  • Max CPU cooler height: 82 mm
  • Max GPU length: 410 mm
  • Max GPU height: 55 mm (dual-slot)
  • Special feature: PCIe 3.0 x16 riser module for GPU installation

قراءة المزيد

المواصفات Raijintek OPHION M EVO حافظة MICRO-ATX من الزجاج المقوى ، ألواح جانبية من الزجاج المقوى على الوجهين ، مساحة لمشعات 360 مم ، متوافقة مع وحدات PSU ATX-و SFX-L ، بطاقات VGA ذات الفتحتين | 0R20B00135

جنرال لواء
العلامة التجارية
الموديل
  • 0R20B00135
كود تخزين مايكروليس
  • 26272
تاريخ متاح الأولى
  • 28 مايو، 2019
وزن المشتريات
  • 6.37 كغ
مقاسات الشحنة
  • 23.10 سم x 45.30 سم x 36.50 سم
الشكل
  • ATX Mid Tower
نافذة جانبية
  • يوجد
عدد مراوح التبريد
  • لا يوجد
اللون
  • أسود
External 5.25 Inch Drive Bays
  • لا يوجد
دعم المبرد
  • يصل إلى 360 ملم


إكسسوارات



قد تكون مهتما بالتالي



تقييمات المستخدمين Raijintek OPHION M EVO حافظة MICRO-ATX من الزجاج المقوى ، ألواح جانبية من الزجاج المقوى على الوجهين ، مساحة لمشعات 360 مم ، متوافقة مع وحدات PSU ATX-و SFX-L ، بطاقات VGA ذات الفتحتين | 0R20B00135

0
لا يوجد تقييم
كن أول من يقيم هذا المنتج

أشكركم على التصنيف!
اكتب مراجعة كاملة.
اختر الصور